 |
EnviraFuel® The Cleaner, Greener Heating Oil with 
The burning of fuels containing sulfur have been found to contribute to
acid rain.
In the fuel oil combustion process the formation of sulfur oxides is a result
of the oxidation of the sulfur contained in the fuel. The quantity
of these sulfur oxide emissions combine with the water vapor contained
in the flue gas or in the atmosphere to form a sulfuric acid mist.
Airborne sulfuric acid has been detected in smog, acid rain and
even snow. This acid is corrosive.
There is currently no law regulating home heating oil.
The original Clean Air Act was passed in 1963. In 1970, revisions
established the basis for the National Air Pollution Control Program.
The revisions of 1990 created the most far-reaching regulatory
increases on emission reductions for diesel fuel.
Currently, there are two categories of fuel oil. The type used as heating
oil and the type used as diesel fuel for on-road vehicles. The
primary difference between the two is the sulfur content.
The sulfur content of most heating oil is typically around 2500
parts per million. The typical sulfur content of Low Sulfur diesel
fuel is 500 parts per million or less.
The EPA mandated the use of ULSD,
(Ultra low sulfur diesel), fuel in model year 2007 and newer vehicles.
This has resulted in a much lower amount of sulfur, now only 15 parts per million.
The Consumer Energy Council of America (CECA) has
prepared this
examination of low sulfur heating oil
to demonstrate the benefits of low sulfur
heating oil fuel to heating oil customers.
The advantages of EnviraFuel®:
-
Environmentally friendly
EnviraFuel®, Low sulfur Fuel1 and
Biofuel2,
blended with our special additives, dramatically reduces the
amount of harmful sulfur oxides released into our air and ground
water.
EnviraFuel® reduces, by 10%, the amount of Nitrogen oxides emissions. These
Nitrogen Oxide compounds in the fuel lead to sediment formation and fuel
degradation.
-
Premium Additives
- Prevent sludge formation.
- Maximize filter life.
- Keep fuel lines and tanks dry.
- Protect Fuel system from rust and corrosion.
- Keeps screens, filters, and nozzles clean of deposits.
- Reduce breeding ground for bacteria and algae.
- Reduce smoke and particulate.
-
Reduced heat exchanger fouling
Tests performed at Brookhaven National Laboratories have concluded that
instead of burning, sulfur turns to sulfuric acid during the combustion
process. It is very corrosive to heat exchangers and will shorten
the life of the heating system. Using EnviraFuel® decreases the
chance of equipment failure and improves fuel efficiency.
Why use EnviraFuel?
- EnviraFuel® dramatically reduces harmful emissions that impact air quality.
- Reduces service calls related to fuel quality.
- Increases the life of existing heating equipment.
- Improves efficiency-resulting in net savings.
- Burns Cleaner. Immediate soot reductions of up to 70%.
Interested?
Order EnviraFuel here or contact Deiter Brothers today!
|
|
Company
